Sold: 0


System: EL3D-3.0.1

Operation: 3.5 inches touch screen

Slicer Software: CHITUBOX

Connectivity: USB

Technology: MSLA

Lightsource: UVLED 405nm

XY Resolution: 7680*4320

Z Axis Accuracy: 0.00125mm

Layer Thickness: 0.01-0.2mm

Printing Speed: 30-70mm/h

Power Requirements: 100-240V 50/60Hz 24V 4A 96W

Availability:Out of stock

  1. 【10″ 8K Monochrome LCD】  ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680×4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.
  2. 【43% Larger than Saturn’s Printing Volume】With a build volume of 219x123x250mm / 8.62×4.84×9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.
  3. 【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength, excellent printing accuracy, and a more smooth surface finish.
  4. 【Reliable Printing Performance】The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence, and PFA release liner with easier model removal and less release tension.
  5. 【Odor-free Printing Environment】The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers


There are no reviews yet.

Be the first to review “ELEGOO SATURN 2 RESIN 3D PRINTER”

Your email address will not be published. Required fields are marked *